PRODUCT

• How long is the curing process?

  Revive has an in-built self-curing mechanism. After the surface is coated, it may take up to 7 days to completely cure. The treated surface should not be washed during this duration.

• Does Revive prevent swirls?

  Revive makes the surface more resistant to swirl marks than other coatings. No ceramic coating can fully prevent swirls. However, if you follow the terms and conditions and maintain the coatings as recommended by Kovalent Coatings you can reduce the chances of swirl marks on the surface. You could always reach out to our approved installer for washing tips!

• Is the warranty transferable?

  No, the warranty is not transferable. It applies only to the original owner of the watercraft.

• What should I do in case of a product failure?

  Our coatings have been extensively tested and hence we don’t expect failures. But, in case of a failure or concern. You must notify our approved applicator within 48 hours of occurrence.

• Can I apply Kovalent Coatings by myself?

  We don’t have a DIY range yet. All our products are designed for professional detailers.

• Do I need to polish my vessel regularly?

  No! One of the key advantages of Revive is that it eliminates the need for annual polishing for up to 3 years. Just maintain it as per the recommendation of Kovalent Coatings.

MAINTENANCE

• Will ceramic coating maintain the gloss of my watercraft?

  Yes, we’ve rigorously tested the performance of our coatings. Revive will retain its gloss for up to 3 years if it is maintained as per the terms and conditions.

• How can I protect the vinyl on my watercraft?

  Restore, vinyl coating, is designed specially to maintain the natural look of your vinyl/leather/plastic and protect it from spills! Restore forms a protective barrier on the surface and repels any liquid you throw at it. For more info, check out the product section above or get in touch with our certified applicator.

• Do I have to maintain my watercraft, even after the coating is applied?

  Definitely! The purpose of ceramic coating is to make the process of maintenance easier and cheaper. For longevity and best results, you must maintain the coating as per the recommendation of Kovalent Coatings.

• Should I use a specific cloth for cleaning my watercraft?

  Yes, a good quality microfiber cloth (over 350 gsm) is recommended to wipe the surface. Never wipe the surface when it is dry as there may be dirt or other contaminants on the surface that can create swirl marks when wiping.

• Will the coating prevent any damage by bird droppings?

  Revive is resistant to chemicals therefore the surface will enjoy protection from bird droppings. However, you must clean any droppings ASAP. Please refer our washing guide for best techniques to remove bird droppings.

• Do I have to worry about my watercraft if it is exposed to sunlight after the application of Kovalent Coatings?

  No! We use Silica in our coatings that is resistant to UV and sunlight.

• Is Revive harmful for the marine organisms?

  No, Revive is eco-friendly and does not have any harmful solvents.